UV printer has the characteristics of printing and drying without making a plate. It can not only print ordinary effects, but also 3D and relief effects, and the printing materials are common: packaging boxes, acrylic, KT boards, U disks, glass, tiles, wood, and metal After the advent, UV printers have become a trend while rapidly occupying the market. The UV printer is very strict in the use process, once improper operation will damage the life of the equipment, please pay attention to the following risk operations.
1. Adjust the head by brute force.
Use external force to adjust the position of the head. Whether it is changing or fine-tuning the print head, do not use brute force, please treat the print head carefully according to the standard.
2. Negligence of working ground.
UV printer printing is greatly affected by static electricity, so you should always check the connection of the ground wire equipment, and regularly sprinkle a little salt water around the ground wire.
3. Switch the circuit at will.
Install and remove the UV flatbed printer circuit at will without turning off the power and turning off the main power supply. This behavior will damage the service life of each system and endanger the head.
4. Cleaning without turning off the power.
Do not pay attention to maintaining circuit boards and other internal systems during cleaning. Please turn off the power when cleaning, and be careful not to let the water hit the circuit board and other internal systems.
5. Use inferior cleaning fluid.
Use inferior cleaning fluid to clean the head. The head is very easy to be contaminated and worn, so please use the manufacturer’s product and the product that has passed the quality inspection to clean the head.
