In order to save ink on the uv flatbed printer, there are several suggestions that must be kept in mind:
- Ensure that the filled ink cartridges of the uv flatbed printer are intact;
- Try to use high-quality original ink for filling;
- Before refilling the ink, the original ink cartridge should be thoroughly cleaned, otherwise, two different inks will be mixed and a chemical reaction will occur, which will cause malfunctions such as plugging. Do not use the procedure of cleaning ink cartridges that comes with the uv flatbed printer. This operation is not only time-consuming, but also not clean enough. The correct operation method is: before adding ink, use a syringe to inject pure water into the ink cartridge, try not to let the water overflow, and then grasp the entire ink cartridge with your hands, and make the ink filling hole upward, and gently shake it a few times to make The remaining ink is fully dissolved in the added clean water.
If you shake it too hard, it may overflow the liquid inside. At this time, wipe it dry with a paper towel or cloth in time to prevent it from spreading and infiltrating into the circuit board and causing hardware failure. Then use a syringe to drain the mixed liquid in the ink cartridge. , Repeat the operation several times, until you see that the color of the extracted liquid is very light, then use the program of cleaning the ink cartridge that comes with the uv flatbed printer to clean it.
