The following Micolorprint uv dtf printer technical experts organize the collection
“6” is:
Method 1:
Power on, power on, pass self-test, use automatic cleaning of uv dtf printer properties, OK!
Method 2:
If method 1 does not work, please use the maintenance software to clean it vigorously, OK!
Method 3:
If method 2 does not work, power off the uv dtf printer, unplug the power supply, connect the computer data cable, then drop the cleaning liquid on the clean paper, pull out the print head to the middle position, and protect the surface of the print head (protect the Do not wipe the head), about 5 or 6 minutes, then push the head back to the origin, and then follow Method 1 or Method 2, OK!
Method 4:
If method 3 does not work, power off the uv dtf printer, unplug the power supply, connect the computer data cable, move the head to the origin (far right), and use a large syringe in the waste liquid bottle to suck forcefully; see if there is waste The ink drips, and then follow method 1 or method 2, OK!
Method 5:
If method 4 still does not work, please check which color or which colors do not have ink, and determine which color, such as the yellow ink channel is not good for ink, the uv dtf printer is powered off, unplug the power supply, connect the computer data cable, and then At the air inlet of the yellow ink channel ink bottle, gently blow air with the syringe (to avoid the backflow of the needle tube, causing the ink to flow back or blowing the ink sac too hard), while checking the surface of the print head to see if there is ink seeping out, about 2~3 drops of ink ooze out, and then use the clean paper with cleaning liquid to gently dip the ink on the surface of the print head, move the print head back to the origin, follow the method 1, or the method 2, OK!
Method 6:
If none of the above methods work, please use the soaking head method. After soaking, follow Method 1 or Method 2, OK!
