What is the reason for the crash of the uv flatbed printer?

Table Of Contents

Don’t panic when the uv flatbed printer encounters a crash during operation. Micolorprint technical engineers can help you analyze the specific situation correctly and guide you. I believe that if you encounter similar problems in the future, you can face it calmly.

        The reason why the crash occurs is mainly caused by the software system, mechanical failure, and internal interference. Knock on the blackboard to mark the key points, and then the senior engineer of Micolorprint uv printer will share with you how to solve the problem.

One: software system

        The software system is the commanding brain of the UV flatbed printer. It is conceivable that if there is a problem with the brain, can it operate normally? Software problems occur on the patchwork machine, so be familiar with the software system of the machine before operating it and operate it correctly.

Two: mechanical failure

1. The movement track of the print head car of the flatbed printer is blocked or the power is insufficient

This is rarely the case on new devices, and may appear on devices that have been used a little longer. The inspection method is to remove the motor belt, separate the sprinkler trolley from the motor, and then push down the trolley by hand. If the movement is not smooth, the track or slider should be replaced, because the resistance to the trolley is large at this time, which will cause the electromechanical abnormality and crash.

2. Nozzle motor failure

Such failures lead to many crashes, and the nozzle motors of universal printers are mainly divided into two types: AC and DC. Among them, the AC type has relatively few failures, and it is common to crash due to wear and tear after a long use time. The DC type has many failures. It will not only crash due to wear, but also have some unexpected failures, which is a headache.

Three: In-machine interference

        The sources of interference to the universal UV printer include external interference and internal interference. The main analysis of the interference situation in the machine is here:

1. Data transmission interference:

Data cables without shielding or poor shielding function are prone to interference and lead to unstable operation. Therefore, data cables with excellent performance and high quality should be used. In particular, although the optical fiber has excellent anti-drying resistance, it is not suitable for frequent bending.

2. Spark interference:

If the parts that are prone to sparks are used in the UV flatbed printer, it will cause many unforeseen failures.

        Summary: If you choose to buy a UV flatbed printer, you need to know more about its performance and parameters, and try to buy the original brand model, so that the frequency of failure will be greatly reduced. The machine should be observed more during use. Once abnormal phenomena are found, they should be caused in time. Pay attention and take timely measures to deal with it, so as to minimize losses.

small_c_popup.png

Let's have a chat

Learn how we helped 100 top brands gain success.