Customer asks:
6090 uv printer after clicking the print function, only action, but not out of ink, the LED light is not lit, what is going on?
Micolorprint answer:
Reason: X-axis data needs raster values to read. If the X-axis direction of the value of the number of errors indicates that the X-direction movement has not been in a 0 state, when the device only moves, but the software tells the board’s position is above 0, it will cause the above problem
Solution: Check the X-axis direction of the raster decoder. If the problem still exists, you need to check whether the raster bar and raster decoder are not parallel enough, and then adjust the next can.