MC-H1A/PC1/ZP1 smart cloud phone case printer manual
Desktop Self-service e-print
Operation Manual
Contents
Machine Parameters
Machine Appearance
Front and Back
Two sides of the machine
Control Panel
Software Instruction
Operation Instruction
1. Unwrap the box
2. Remove the fixtures
3. Add Ink
4. Get power for the machine
5. Load Ink from PrintExp software
6. Scan the QR code
7. Put your object
8. Ready to print
9. Finished printing and picked up the goods
Troubleshooting
Client-server status shows red light on
The machine status shows red light on
Photo printed blur
Matters need attention
Important notification
Machine Parameters
| Describe | State |
| Printer Head | Expson XP600/I1600 Head |
| Print Method | Single head, 4 colors(CMYK），ink-jet on demand |
| Color Mode | C Cyan. M Magenta. Y Yellow. K Black |
| Ink Capacity | UV Ink 250ml x 4 |
| Printing Speed | 2min / pics |
| Recommended case | Silicone、TPU、Plastic、Leather、Acrylic、Metal |
| Printer head protection | Auto Clean / Manual Clean |
| Table PC | 10.1 Inch，1920 x 1200 IPS screen，Harper-town 1.92Ghz |
| Machine Size | 60cm x 47cm x 42.5cm |
| Package Size | 70cm x 54cm x 51cm |
| NW/GW | 33kg / 46kg |
| Way of Packing | Carton |
| Voltage | 50/60HZ 220V(±10%) 110V（±10%） |
| Machine Power | 40W / 150W |
| Operating Environment | 20-28℃（68-82℉）HR40-60% |
| Ink Supply System | Continuous Ink Supply System |
| Operation Software | PrintEXP + Client Server + App |
Machine Appearance
Front and Back
 Front |  Back |
| Describe | State |
| ① Button Function | Touch-Controlled Mini Computer |
| ② Platform | Put the object that you want to print there |
| ② QR Code | Scan the code to upload the picture that you want to print |
| ④ Tablet PC | Touch-Controlled MiNi Computer |
| ⑤Power connect port | Support 220V(±10%) ，110V（±10%） |
| ⑥ Power Switch | Printer master switch |
| ⑦ Ventilation and head dissipation | Continuous performance |
| ⑧ Power radiator | Continuous performance |
TWO sides
Left 
Right
Left cover: Open the left cover to add ink
Control Button
| Describe | State |
| ① NOZZLE | Print nozzle check to see if the color comes out in condition |
| ② PAUSE | Stop print |
| ③ CLEAN | Clean your head automatically |
| ④ L | Carriage move Left |
| ⑤ OUT | Tray move front |
| ⑥ DOWN | No function for it(ignore) |
| ⑦ IN | Tray move back |
| ⑧ R | Carriage move Right |
| ⑨ UP | No function for it(ignore） |
Software Instruction
| Describe | State |
| ① Printer Number | Identify the printer number |
| ② Sever Status | Display the connection status of the machine server Green： Machine connected to the network Red： The machine network disconnected |
| ③ PC Status | Display the connection status of the PC and the machine Green：pc and printer connected successfully Red：pc and printer connection failure |
| ④ Version Information | Printer software version information and print quantity |
| ⑤ Print job list | In order to be printed, keep pressing to cancel |
| ⑥ Printing Orders | ② Server Status |
| ⑦ Start Print | Click one of the print jobs to start printing |
| ⑧ Job history list | Print job history list |
| ⑨ About | About custom service information |
| ⑩ Language | Switch language(Simplified/Traditional/English) |
| ⑪ Ext | Exit App |
Operation Instruction
1. Unwrap the package
 |  |  |  |
| Sensor | Power cord | Screwdriver | Syringe |
2. Remove the fixture
First： open the machine’s upper cover.
Second： use a screwdriver to remove the number “1” screws；
Third： use scissor cut number “2” zip tape；
3. Add Ink
 |  |
| Add ink into the ink container according to the color labels on the top of the cap | Add ink into the ink container according to the color labels on the top of the cap |
4. Connect the power to the machine
Connect the power cord， press the switch ON power
5. Load ink
1、 Open PrintExp software 
2、Click“Load Ink”about 30seconds，when the windows pop up “Stop”,about 5seconds，then click “Load Ink”about 10seconds。
3、In the control panel, press “Clean”, and clean twice
6. Scan the code
Open WeChat/Web or any APP that has a scan code function, scan the code, upload the photo that you need to print, and then start printing.
7. Place object
Place the object on the platform, and keep it even
（The phone case needs to be put with the camera side on the platform’s right top corner）
8. Start print
Choose the photo that you need to print from the print job list, and click “Print.”
9. Finished printing and took out the object
The tray will go out when it is finished printing, then take out the print object
Troubleshooting
The server status is shown in red
Please confirm if the Touch-Controlled Mini Computer has connected to the WI-FI. If not, need to connect to Wi-Fi first， click the Menu bar icon
at the bottom of the computer, click “Other Networks”， then click “Others.”
The printer status shows in the read
Please confirm the opened PrintExp software
in the Touch-Controlled Mini Computer. If not, please double-click PrintExp software to open
, then open Client Server software.
Printed effect compared
1. The printed result is not good, as shown below
 |  |  |
| Print distance is normal | Print distance a bit | Print distance too far |
| good | bad | too bad |
2. print result as above， “good”, “bad”, or “too bad”. The print result depends on the printing distance between the print head and print object; the best print distance is about 2-3mm， and over 3mm, the ink will be blurred. If you find it hard to judge the print distance well, send a message to the customs service.
Matter needs attention
- Do not install and use the machine in an area where children will be nearby。
2. To reduce the absorption of chemicals through the skin, gloves should be worn when maintaining the machine or touching the ink.
3. Do not put the printer in an unstable place, and avoid shaking.
3. Do not place the printer where there is a big temperature difference, and avoid direct sunlight
4. Do not place the printer in an uneven place; the printer must work in an even place.
5. Place the printer on the sturdy table.
6. Do not use any broken power cable to connect the printer.
Important notification
The following situations are not under the warranty scope：
1、The problem is caused by not using the accessories and consumables that come from our company.
2、The problem was caused by not using our suitable ink
3、Unauthorized maintenance、misuse、crash、abuse、accident、modify or cripple、alter labeling、false proof.
4、Damage by any force majeure or human.